You are here: New home » Products » Compact Pressurized Solar Water Heater (SPP) » rooftop Compact Pressurized Solar Water Heater

Integrated lower pressure series

loading

Share to:
sharethis sharing button

rooftop Compact Pressurized Solar Water Heater

Quantity:

Insulating layer: Foaming polyurethane, thickness: 50mm
Thermal conductivity: 0.022W/m. K
Inner tank: Stainless steel (SUS 304 2B or 316L stainless steel)
Thickness: 1.2mm
Sealing rubber: 110 methyl silicone rubber with vinyl
Dustproof rubber: EPDM
Frame: Aluminum alloy
Collector tilt Angle: 45°
Tailstock: Nylon
Daily efficiency: > 50%
Heat loss coefficient: 10W/mm

Working pressure: < 0.6MPa
Electric booster: 1500W
 

Inner tank adopts 1.2~2.0mm SUS3042B stainless steel and automatic wending technology, which decrease the corrosion and against the 0.6Mpa pressure .Outer tank 0.4mm SUS3042B stainless steel Heat insulation of water tank adopts polyurethane foam, thickness is 55mm.

The tubes and supports are adjustable, power bearing is average and assure the tubes to use long time.

Whole vacuum tube adopts super borax and silica glass. Absorb rate≥96%, thermal radiationrate≤4%.Resist25mmhail, using life lasts 15years.

Silicon ring to connect and seal them.

Previous: 
Next: 

Solar Water Heater

Pre-Heating Solar Water Heater with coil

Contact Us

   2969LongchengRd.Xinbei
District,Changzhou,Jiangsu,China
  Phone:86-519-85083393
     WhatsApp:13701509293
   info@sunpower-solar.com

Contact Sunpower Solar

Don’t let a limited budget keep you from getting the comfort equipment you need for your home or business,Sign up to receive our Solar energy expertise by solar pros!

CONTACT US
Home
Copyright 2013 badelite.com All Rights Reserved   Jiangsu Sunpower Solar Technology Co,.Ltd.