Views:0 Author:Site Editor Publish Time: 2020-01-07 Origin:Site
The installation of solar water heater has its own special requirements. Only by following the installation requirements of solar water heater, can the good use effect of solar water heater be guaranteed.
l Installation methods and procedures
l Attentions for installation of solar water heater
In theory, you can install solar water heaters yourself. But the installation of solar water heater needs a lot of tools, including drilling, fixing, water pipe, overflow pipe, etc. If these are not professional, it will be difficult to succeed. Solar water heater installation is prone to loopholes, affecting the use and life of solar energy. Therefore, if you buy solar water heater online, it is better to find a local maintenance and installation team to install solar water heater. Let me tell you how to do it.
1. First of all, we need to do some preparatory work and install some necessary tools for solar water heaters in need. At this time, you can open the package of solar water heater, check whether the equipment is complete.Generally speaking, install solar water heaters on the roof, try to locate and orient the sun, and then mark them.
2.In the installation procedure of solar water heater, we will use a fixed bracket, which is usually called solar bracket. This progress can ensure the stability of the solar water heater. In addition, the installation of solar water heater mainly uses cement pier or similar tools to support the bracket.
3.Next, we need to choose a good position to do the bracket according to the specific situation of the roof, and then enter the wiring work. It is important to remember that the electrical devices connected to solar water heaters should not be misconnected. We know that the red line is the fire line, the two-color ground line and the remaining zero line. These three lines must not be misconnected. After that, connect to the tropical wire.
4.In the installation process of solar water heater, we need to use a fully intelligent controller. The main purpose of the controller is to ensure that the water in the water tank is sufficient. In addition, it can also carry out the functions of automatic water feeding and effluent. After installing the water tank of the solar water heater, the solar water heater can be debugged and run basically.
1) Lightning rods should be installed on the top of solar water heaters at higher locations to prevent lightning strikes and accidents.
2) When installing in groups, attention should be paid to the distance between front and rear rows of collectors. For families using solar water heaters all year round. The installation height of the collector can consider three times as high as that of the solar water heater. If summer is dominant and spring and autumn are considered. The installation height of the collector can be considered as 0.85 times as high as that of the solar water heater.
3) After the installation of the system, the water flow debugging requires no leakage of the collector, water tank and all pipeline valves before acceptance and delivery for formal use.
Solar water heater heates water temperature by fully absorbing solar energy and converting solar energy into thermal energy. For the selection of installation location of solar water heater. And the selection of installation location of solar water heater. It is necessary to select a place with sufficient sunshine and fixed position. Any building or tree is best not to conceal it. Generally, balcony, roof, roof and other space should be chosen. Jiangsu Sunshine Technology Co., Ltd. is a leisure place, not only to provide quality products, but also to provide quality services. If you are interested in our products, you can contact our company as soon as possible.
Inquiry E-Mail: firstname.lastname@example.org
Don’t let a limited budget keep you from getting the comfort equipment you need for your home or business，Sign up to receive our Solar energy expertise by solar pros!