You are here: New home » Products » Project Type Solar Water Heater (SPCF) » Project Balcony residential Solar Water Heater

Integrated lower pressure series


Share to:

Project Balcony residential Solar Water Heater

Manifold material: Aluminum
Thickness: 2mm
Insulation: Rock wool
Vacuum tube: 1.6-2.0mm
High borosilicate glass
Thickness: 1.6-2.0mm
Diameter: 58mm
Length: 900mm
Hail resistance: 28mm
Heat pipe: Oxygen free red copper
Seal ring: Silicone rubber
Frame: Aluminium
Thickness: 2.5mm
No water in tubes so never burst and fur up, high heat conduction and never hibernate
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (upto 0.6MPa)
Used in split solar heating system for water heating, Solar collectors with different quantity of vacuum tube can be assembled with a water tank of different capacity.
Perfectly designed, suitable for any architectural style, and harmoniously integrated with owners building.
Collector can be installed in a single house as well as a commercial building with a centralized hot water system!
The collectors integrated and modularized design is optimized for both installation and operation.

Solar Water Heater

Pre-Heating Solar Water Heater with coil

Contact Us

  Phone:86-519-85083393

Contact Sunpower Solar

Don’t let a limited budget keep you from getting the comfort equipment you need for your home or business,Sign up to receive our Solar energy expertise by solar pros!



Copyright 2013 All Rights Reserved   Jiangsu Sunpower Solar Technology Co,.Ltd.