You are here: New home » Products » Copper Coil-Pre-Heat Type Solar Water Heater (SPHE) » Copper coil tank pressurized Solar water heater

Integrated lower pressure series


Share to:
sharethis sharing button

Copper coil tank pressurized Solar water heater

This solar collector is designed according to the international standard. It adopts the copper coil as heat exchanger. This solar collector is very easy to install and operate.
Outter tank,SUS304 stainless steel,inner tank SUS304 stainless steel
  • SPHE

  • Sunpower

This solar collectors provides mains pressure pre-heating via a high efficiency copper coil heat exchanger which is placed in the inner tank. 
The way in which the Mains Pressure solar collector heats water is the same as the Non pressure solar collector...Rather than using the water in the tank directly, as the Non pressure does, the type uses a 45, 60 copper coil 

Heat exchanger inside the tank which provides more than 1.2m2 of heat transfer area. When water flows though the coil it absorbs heat from the water inside the solar collector tank. The solar collector tank is therefore a thermal store. 
One advantage of this system is that almost no water is introduced into the tank(apart from occasional topping up), so corrosion and scale buildup are almost totally eliminated. 
Tanks are designed for low to medium pressure applications using gravity feed tank or pressure reduction valve. Direct connection to mains pressure water supply is not permitted. Please check your local building/plumbing regulations regarding the installation of water tanks.


Solar Water Heater

Pre-Heating Solar Water Heater with coil

Contact Us

  Phone:86-519-85083393

Contact Sunpower Solar

Don’t let a limited budget keep you from getting the comfort equipment you need for your home or business,Sign up to receive our Solar energy expertise by solar pros!

Copyright 2013 All Rights Reserved   Jiangsu Sunpower Solar Technology Co,.Ltd.