Solar Water Heaters,Solar Energy Water Heaters manufacturer & factory in China.
English / 简体中文 / Español / Deutsch / Pусский
You are here: Solar home » Products » Compact Pressurized Solar Water Heater (SPP) » Compact Solar Water Heater system suppliers

Integrated lower pressure series

Share to:

Compact Solar Water Heater system suppliers

Quantity:

Insulating layer: Foaming polyurethane, thickness: 50mm
Thermal conductivity: 0.022W/m. K
Inner tank: Stainless steel (SUS 304 2B or 316L stainless steel)
Thickness: 1.2mm
Sealing rubber: 110 methyl silicone rubber with vinyl
Dustproof rubber: EPDM
Frame: Aluminum alloy
Collector tilt Angle: 45°
Tailstock: Nylon
Daily efficiency: > 50%
Heat loss coefficient: 10W/mm

Working pressure: < 0.6MPa
Electric booster: 1500W
 

Inner tank adopts 1.2~2.0mm SUS3042B stainless steel and automatic wending technology, which decrease the corrosion and against the 0.6Mpa pressure .Outer tank 0.4mm SUS3042B stainless steel Heat insulation of water tank adopts polyurethane foam, thickness is 55mm.

The tubes and supports are adjustable, power bearing is average and assure the tubes to use long time.

Whole vacuum tube adopts super borax and silica glass. Absorb rate≥96%, thermal radiationrate≤4%.Resist25mmhail, using life lasts 15years.

Silicon ring to connect and seal them.

ABOUT SUNPOWER

CONTACT

Add:2969 Longcheng Rd. Xinbei District,Changzhou,Jiangsu,China

Tel:0086-519-85083393
Mobile:0086-13701509293
Fax:0086-519-82078658
Person: Townway Zhang / Keyway
E-mail:info@sunpower-solar.com
Copyright 2013 badelite.com All Rights Reserved   Jiangsu Sunpower Solar Technology Co,.Ltd.   .SITEMAP