Balcony type solar collector SPV
Manifold material: Aluminum
Insulation: Rock wool
Vacuum tube: 1.6-2.0mm
High borosilicate glass
Hail resistance: 28mm
Heat pipe: Oxygen free red copper
Seal ring: Silicone rubber
No water in tubes so never burst and fur up, high heat conduction and never hibernate
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (upto 0.6MPa)
Used in split solar heating system for water heating, Solar collectors with different quantity of vacuum tube can be assembled with a water tank of different capacity.
Perfectly designed, suitable for any architectural style, and harmoniously integrated with owners building.
Collector can be installed in a single house as well as a commercial building with a centralized hot water system!
The collectors integrated and modularized design is optimized for both installation and operation.
Model product Size (mm) (L× W× H) Lighting (m2) Supply Hot Water(L/) Qty. Per 20' / 40'Container
SPV-H1500/47-20 3290× 840× 130 2.0 120/60 125 242
SPV-H1500/47-24 3290× 980× 130 2.55 150/60 110 205
SPV-H1500/47-30 3290× 1190× 130 3.1 180/60 85 160