The IAM longitudinal was measured for one angle  = 50. All other angles
for the IAM longitudinal in table 2 were calculated according to Ambrosetti
1(equation 2).

7 Effective thermal capacity of the collector
The effective thermal capacity of the collector is calculated according to
section 6.1.6.2 of EN 12975-2: 　 25.90 kJ/K
The effective thermal capacity per sqaure meter is:　 15.18 kJ/K m2

9 Collector identification
The collector identification/documentation according EN 12975-1 chapter 7
was complete, see the following items:
　　  Drawings and data sheet
　　  Labeling of the collector
　　  Installer instruction manual
　　  List of used materials

10 Summary statement
　　 The measurements were carried out in July 2006.
　　 No problems or distinctive observations occured during the measurements.
11 Annotation to the test report
　　 The results described in this test report refer only to the test collector. It is
　　 not allowed to make extract copies of this test report.

　　　　　　　　　　　　　　 Test report: KTB Nr. 2006-12-a-en-k
　　　　　　　　　　　　　　 Freiburg, 17th August 2006
　　　　　　　　　　　　　　 Fraunhofer-Institute for Solar Energy Systems ISE